Podrška kompanije SonyPojačala za slušalice

TA-ZH1ES

Vrhunsko pojačalo za slušalice sa D.A. Hibridno električno kolo pojačala / Uključene komponente mogu se razlikovati u zavisnosti od zemlje ili regiona u kom se kupuju: RMT-AA250U

Važne informacije

Pitanja i odgovori: 43

Can I transfer music or pictures into the Media Go Software via Drag and Drop?You can drag and drop existing supported media files from Windows Explorer or iTunes into Media Go to add them to your Media Go library, playlist, photo album, or device, or to begin playing the items. If you drag
Frequently asked questions related to High-Resolution audio.IMPORTANT: Not all devices have High-Resolution function capabilities. To see if your device has the Hi-Resolution function described in this solution, check the product specifications. You can find here below a
The indicator does not light up, even though DSEE HX or DSD Remastering is set to ON. (TA-ZH1ES)Check the following. When the DSEE HX indicator does not light up even though DSEE HX is set to ON. [A]: DSEE HX indicator DSEE HX works only with the following formats. If an incompatible input signal is received
The sampling frequency of the output signal in the display window does not change, even though DSEE HX is switched ON/OFFThe display does not change since data is oversampled, even though DSEE HX is not processing.
What is the recommended application for playing back music files on a PC? （TA-ZH1ES）The recommended application is Hi-Res Audio Player (Ver.1.2.5 or higher). Media Go can also be used. NOTE: Media Go is not compatible with the following sampling frequencies: DSD 22.4 MHz, PCM 768 kHz, PCM 705.6
TA-ZH1ES cannot be recognised by Hi-Res Audio PlayerCheck the following. Check whether PC (USB-B) appeared on the display window of TA-ZH1ES. NOTE: Press INPUT button repeatedly to select PC (USB-B). PC (USB-B) appears in the display window. [A]: INPUT button [B]:
Error: No output device has been selected appears on the window display and playback stops. (TA-ZH1ES)Open Control Panel then select Sound and the Playback tab. Select Speakers etc. as the Default Device. NOTE: By making this setting, the TA-ZH1ES only plays sound from software (Hi-Res Audio Player, etc.).
Why is PCM displayed on the TA-ZH1ES even though Xperia play content with DSD signals?Xperia converts DSD signals to PCM signals. Different signals are converted by the Xperia see the chart below: Xperia Name TA-ZH1ES Display Xperia A2 PCM48kHz 16bit Xperia Z2 PCM192kHz 24bit Xperia Z3
The Xperia cannot be connected to TA-ZH1ESTurn on the Xperia and then connect a cable. Note: For Xperia XA, connect a cable while the Xperia XA is turned off, and then turn on the Xperia XA. If the Xperia still cannot be connected to the unit, check whether
What headphones does the device support?Can I use headphones with the noise canceling function? Can I connect to more than one terminal? The headphones supporting the device are as follows. Balanced standard (4.4mm in diameter), 3-pole mini (balanced

Važne informacije

Obaveštenje o prestanku podrške za proizvode koji koriste operativni sistem Windows 7

Registrujte proizvod
Pristupite svim informacijama, redovno ažurirajte svoj proizvod i uživajte u sjajnim ponudama
Zajednica kompanije Sony
Posetite zajednicu i podelite svoja iskustva i rešenja sa drugim korisnicima proizvoda kompanije Sony
Kontakt sa podrškom
Obratite se timu za podršku kompanije Sony
Popravka i garancija
Rezervišite, pratite ili čak izbegnite popravku